Audix ATS1 Shock Absorbent Microphone Stand
For ultimate flexibility and portability, the optional ATS1 heavy duty table stand is ideal. Since the electronics for the ADX112/118 are built right into the base of the microphone, all that is necessary is to plug the mic directly into the table stand connector on the top of the base.
Features
- Heavy duty die cast base
- Design limits touch noise and vibration
- 4x programmable talk-mute functions
- Remote control function settings
Mic cables can be plugged into the back of the base and connected to a low impedance mic level input on the mixer or recording device.
Remember that phantom power must be available in order to operate. There is a noiseless 2 position on-off switch located in the table stand. The LED indicator light will be lit when the mic is turned on. This is not a push-to-talk system so you need not hold down the switch, just push and click to on or off position.
The ATS1/LP and ATS1/LX add logic control via either Phoenix connector or 5pin XLR.
Specifications
- Input: 3-pin XLR/F
- Output: 3-pin XLR/M
- Dimensions: 160 x 124 x 45mm, 1.4kg
